28.09.2003, 10:23
Hallo TeraVolt,
ich habe eine Ein bzw. Ausbauanleitung bei Vette-Essentials gefunden, vielleicht hilft die ja weiiter
Step 4a: Stock shift knob removal. At the bottom of the shift knob and facing the front of the car, there is what is effectively a sturdy staple that retains the stock shift knob in place. The legs of the staple are about 3/4 inch long. Using the tiny screwdriver, gently pry out and remove the staple. The staple should come out with moderate force or less, and once it is partially out you can pull it out with your fingers or the needle nose pliers. The room to pry under the staple is so slight that you may not be able to use a protective cloth. The head of the staple is shown in the photo, and note that the photo is taken from the front of the car looking downward.
![[Bild: p3240042rann.jpg]](https://www.vetteessentials.com/instructions/auto_b&k/p3240042rann.jpg)
Gruß
Thorsten
ich habe eine Ein bzw. Ausbauanleitung bei Vette-Essentials gefunden, vielleicht hilft die ja weiiter
Step 4a: Stock shift knob removal. At the bottom of the shift knob and facing the front of the car, there is what is effectively a sturdy staple that retains the stock shift knob in place. The legs of the staple are about 3/4 inch long. Using the tiny screwdriver, gently pry out and remove the staple. The staple should come out with moderate force or less, and once it is partially out you can pull it out with your fingers or the needle nose pliers. The room to pry under the staple is so slight that you may not be able to use a protective cloth. The head of the staple is shown in the photo, and note that the photo is taken from the front of the car looking downward.
Gruß
Thorsten